Air Filter Housing Overview

Air Filter Housing Overview






1 Intake Hose

• Make sure it is secure.

• Clean if there are contaminants.

• To the adapter (see - item 35 - in the => [ Turbocharger and Components Overview ] Turbocharger and Components Overview) on the turbocharger.

2 Mass Airflow Sensor (G70)

3 O-ring

• Replace if damaged.

4 Vacuum Hose

• Make sure it is seated correctly and is routed without kinks.

• From the silencer.

• Vacuum hose connection diagram. Refer to => [ Vacuum System Overview ] Vacuum System Overview.

5 Bolt

• 2 Nm

6 Upper Air Filter Housing

7 Intake Air Duct

• Bolted to the lock carrier.

8 Bolt

• 5 Nm

9 Intake Air Duct

• Make sure it is secure.

• Clean if there are contaminants.

10 Water Drain Hose

• Clean if there are contaminants.

11 Lower Air Filter Housing

12 Intake Hose

• For the warm air intake.

• Make sure it is secure.

• Clean if there are contaminants.

• From the warm air collector plate (see - item 2 - in the => [ Turbocharger and Components Overview ] Turbocharger and Components Overview) on the exhaust manifold.

13 Bolt

• 8 Nm

• A permanent bolt.

14 Snow Screen

• Clean if there are contaminants.

15 Air Filter Element

• Always use an original equipment air filter element. Refer to the Parts Catalog.

• Follow the replacement intervals.

16 Bolt

• 3.5 Nm