Rear Door Lock

Door Lock

• Removing and installing the door lock is described. Removing and installing the left door lock is identical.

Removing






- Remove rear door trim..

- Remove subframe. Refer to => [ Subframe ] Subframe.

- Remove the bolts - 5 -.

- Remove the lock - 1 - from the door - 2 -.

- Loosen the cable - 7 - on the door lock bracket.

Installation






• Make sure to install the cover before installing the door lock.

- Push the cover - 1 - onto the guide - 2 - - arrow a -.

- Lock the cover - 1 - into the center of the door lock - 2 - - arrow b -.

Install in reverse order of removal.

- Make sure the connector seal is attached to the door correctly.

• Then a function test must be performed because the lock will not open if the release cable is not adjusted and secured correctly.